GRAND OPENING GREAT DISCOUNTS

FREQUENTLY ASKED QUESTIONS

HomeFAQ
Shield - The Ultimate Protection

FAQ

What are the advantages of Titan XT™ brand PPF versus other products on the market today?

Titan XT™ is formulated using FlexCoat™ Crosslink Technology, which brings together all desirable features in a paint protection film. Many films on the market compromise the performance of one feature to achieve another. Titan XT™ has Uncompromised Performance, which means you can expect ALL desired features to perform at top ratings in the industry.

Benefits:


- Exceptional stain resistance that keeps on performing year after year.
- Unmatched Chemical Resistance - the only film which stands up to the harshest elements that seek to destroy the film.
- Scratch Resistance with self-healing properties. Completely restorable film for deeper scratches.
- Ranks first in puncture resistance, protecting your vehicle surface better than other products.
- Low friction resists dust and dirt from accumulating on top the film.
- Easier, hassle-free installations. Titan XT™ reduces installation time by conforming easier to valleys. Less bubbles and moisture are left behind during application, making the edges of the film bond faster and easier.
- Titan XT™ ranks 1st in puncture resistance when compared to the top premium films in the market. Titan XT™ will not tear during installation.
- Repositionable adhesive allows you to re-lift the material when necessary without disruption to the appearance of the adhesive.


What is the warranty for Titan XT™?

Titan XT has a 10-year warranty with coverage for manufacturing defects including yellowing, bubbling, adhesive delamination, and cracking. Please visit the Titan XT™ Warranty for complete detail information.


Where is Titan XT™ produced and sold?

Titan XT™ is made in the USA and distributed worldwide.


What other types of products can Titan XT™ be applied to?

Titan XT™ is excellent for electronics, kick plates, motorcycles, bicycles, recreational vehicles, personal watercraft, and more. Test to make sure it will properly adhere to the surface area. PPFs are not suitable for windshield applications.


When and what areas should have Titan XT™ installed on my vehicle?

The best time to install Titan XT™ is before you drive it off the dealership lot or immediately after purchase. On a repainted vehicle, proper curing must be complete first. Film should only be applied on professionally repainted or new vehicles. Investing in a Titan XT™ application keeps your vehicle looking new longer. Common areas for application are:
- Front areas: Hood, bumper, fenders, mirrors, A-pillars, leading edge of the roof
- Read areas: Behind rear wheel (splash guard), top of rear bumper
- Mid-section: Door edges, rocker panels, and area under door handles
- Full Vehicle


What is the proper care of the Titan XT™?

- Immediately after Installation:
Wait 48 hours after installation to wash your vehicle. Lightly wiping the film clean with water and soap will not harm the film. The adhesive will reach its full strength after 72 hours.

- Titan XT™ can be cared for much like the rest of your vehicle. Removing bug splats, bird droppings, and frequent washing will keep your film looking newer longer.
- Any stains that remain after normal washing can be removed with 91% isopropyl alcohol or products such as Clorox® Cleanup. Always test any cleaners not recommended by the manufacturer in a small, inconspicuous area first. Contact us for additional recommendations.
- Light scratches will heal in the sun with time. The time frame depends upon the severity of the scratch and the temperature.
- Deeper scratches can be hand polished or polished using a buffer to restore (use carefully to not burn through the film).
- Wax may be applied to the film. Use nonabrasive waxes. Remove any residue along edge of the film with isopropyl alcohol and cotton swab.
- Do not use high pressure nozzles next to any film edges.


Can Titan XT™ be removed?

Yes. Titan XT™ can be removed years after application. We recommend using a qualified installer for removal. When no installer is available, the material can be removed carefully with a clothing steamer, heat gun, or hair dryer. A clothing steaming will provide the best results for removing film. Soften and warm the film, this will soften the adhesive under the film. Slowly pull back the edge at a 180° angle to the applied surface. Use isopropyl alcohol or an approved adhesive remover to clean any remaining adhesive on the vehicle surface.


Does Titan XT™ turn yellow?

Titan XT™ blocks airborne and surface contaminants so they will not penetrate the film to cause discoloration. Additionally, UV inhibitors are in the film to resist harmful sun damage.

contact us

- 6th of October : Melanite Mall - Parking lot, Al Wahat Road, next to Mall of Egypt, 2nd right after Wadi Degla .
+20 127 555 77 99 & +20 112 112 28 13


- 5th settlement BRANCH : 251 north teseen st. infront of mobil gas station .
+20 127 555 77 99 & +20 100 221 94 94
Email: support@shieldppf-eg.com
Open Location Map